Professional 3C accessories manufacturer focus on wireless charger and power bank!
HOME->UPS Power Supply
Share ESS-3000

 

1Peoples Likes
   点击刷新验证码
Product Description

Product description:

The medium-sized energy storage power supply used lithium-ion batteries as the core and adopts high frequency inverter technology to create ultra-high-power energy storage power supplies that can satisfy almost any usage scenario.The product adopts a brand-new metal chassis design and internal drawer type slot,which allows the user to select the number of batteries according to the demand for power.The product supports on-line switch function ,on-grid charging and discharging ,independent off-grid inverter ,and solar and wind energy charging.At the same time equipped with a LED LCD monitor ,monitor the real-time status of input and output ,power usage at a glance.Super large capacity,super large output power ,super power to be loaded with life,bring you new experience.

ESS-3000 Smart Grid Energy Storage System

Ⅰ product description

The smart grid is a new type of energy-saving power supply system supplemented by mains electricity power generation and power grids which solves the need for users to rely too much on the national grid.  Based on commercial power wind power generation and solar energy, lithium batteries are used for energy storage and the three are fully integrated so that they can be used for their own use and the remaining power can be used to access the Internet.  Balanced peak power usage low valley energy storage off-grid use automatic switching of power outages and other functions are used to fully utilize power. The WINDOWS operating system is used here. All data can be stored continuously for more than 10 years. After connecting using WIFI  The server can control the data of all products and store it in the background system to facilitate data analysis.

It is a smart microgrid powered management system.  Widely used in home power supply small industrial power supply large island power supply urban special power supply system.  It can be connected to the grid and can be used off-grid to solve the over-reliance on outdoor science research indoor lighting monitoring medical treatment fire protection and national defense on the power grid. It can realize autonomous power supply of local micro-grid energy saving environmental protection,and benefiting the country and the people.


Ⅱ Function principle explanation


working principle:

Mains input solar panel input wind turbine input input into the integrated management system for unified management and energy calculation; solar energy wind energy through the system constant voltage and constant current and MPPT mode to charge while energy  The management of follow-up and storage; Lithium battery output through the inverter for external load output; When the lithium battery is fully charged for the load power supply mode while the solar energy wind energy continue to charge the lithium battery; When the lithium battery uses 30% of the power  At the same time the mains power supply for the load while the solar energy wind energy continue to charge the lithium battery; when the load is not used the lithium battery power is 100% solar energy wind energy is not charging the battery excess electricity can be generated through the inverter to the grid  .  Grid-connected power generation as an accessory can increase this function

Display mode

Display:

Mains input is shown as:

input voltage current power cumulative power; load output is displayed as: output voltage current power cumulative power; battery power is displayed as battery capacity percentage also shows the battery voltage; start switch to start  All internal work.  The amount of electricity saved is the total output of the output minus the cumulative amount of input is equal to the amount of electricity saved

Ⅳ Comprehensive working principle


Ⅴ Function panel description

Panel description:


Ⅵ Functional instructions

1. Before using the device check the appearance and confirm that there is no damage. Start the power-on button first and plug the additional power into the universal output socket. After the electrical device can be used normally perform the following wiring operations.  If there is no voltage output please immediately return to the factory for repair.

2. Connect the earth wire, neutral wire and live wire of the mains to the equipment according to the wiring method marked on the equipment. Be careful not to make mistakes. After the wrong connection the equipment will be burned out and the output display panel cannot be displayed.  When the neutral line and live wire cannot be identified during the wiring process please use the electric pen to test. The electric pen test to the red light is the live wire  .

3. Wiring the solar panel according to the device's instructions. Note that the positive and negative poles cannot be reversed.  After reversed the device will go into protection.  According to the positive pole of the solar input terminal the positive pole of the terminal is connected to the terminal.  Solar panel input voltage is divided into two kinds 3000W output power with 24V solar panels input power does not exceed 3000W; 6000W and 10KW output power with 48V solar panels input power does not exceed 5000W.  Solar panels are equipped with controllers with MPPT.

4. Wiring the wind turbine according to the equipment's instructions. Note that the positive and negative poles cannot be reversed.  After reversed the device will go into protection.  According to the anode of the wind generator input the anode of the terminal is connected to the terminal and the negative terminal of the wind generator is connected to the negative terminal of the terminal.  The input voltage of the wind generator is divided into two types a 24V wind generator with 2000W output power an input power of no more than 3000W and a 48V wind generator with 6000W and 10KW output power and the input power does not exceed 3000W.  Wind turbines are equipped with controllers with automatic braking.

5. Connect the earth wire, neutral wire and live wire of the load to the equipment according to the wiring method marked on the equipment. Be careful not to make mistakes. After the wrong connection the equipment will be burned out and the output display panel cannot be displayed.  When the neutral line and the live line cannot be identified during the wiring process use an electric pen to perform the test. The electric pen tests until the red light is on.

6. After the access is completed press the start switch on the device. At this time the input panel and the output panel will light at the same time. The input voltage input current input power cumulative power display output voltage input current input will be displayed above.  Power accumulated power; battery LCD will show the current battery power.

Ⅶ product electrical parameters



Ⅷ Standby time


Ⅸ packing list


Ⅹ Precautions
1.This product contains a lithium battery ,please keep away from fire,if not use special treatment,do not arbitrarily discard.
2.Do not use this product in a humid environment or in water.Pay  attention to moisture protection and use in a dry and ventilated environment.Please handle it gently,and do not drop,beat or violently dismantle it.
3.If any smoke,fire,or other abnormal phenomena occur during use of the machine ,immediately stop using it and take related firefighting measures to prevent explosion.
4.When using the product for the first time,please refer to the product instruction manual.Please turn on the power ,turn on the corresponding switch,and instruct the panel to light up to confirm that there is output before use.
5.When using it outdoors,turn off the switches and turn them on when they are needed.Otherwise,the battery will be automatically consumed.
6.When this product is not in use ,please take out it once every three months or so to ensure the battery life.